Catalogue → Cararra series
Carrara Plasma quartz
White with sparse, wispy grey marks. Almost plain, with just enough movement to read as stone.
Specification
| Rate | ₹650 per sq ft MSP, material only |
|---|---|
| Series | Cararra |
| Finish | Polished |
| Thickness | 2 cm |
| Slab size | Regular · 322 × 147 cm 51 sq ft per slab |
| Cost of one full slab | ₹33,150 material only |
| Brand | Paradigm |
| Stock | On the racks in Maduravoyal, Chennai |
What it costs to fit
The ₹650 rate covers the stone only. A regular slab is 147 cm wide, and a platform 2 ft deep takes 61 cm of that, so one slab yields two full-length runs of about 10.5 ft with a 25 cm strip to spare. A two-run kitchen fits one slab; add an island and you are into a second.
Fabrication and installation is ₹12,000 per slab and covers cutting, edge polishing, transport and fitting. Sink and hob cutouts are charged separately. A pencil-nosed edge is included; bull nosing is ₹150 per running foot and a mitred joint, which makes the edge look like a thicker slab, is ₹300 per running foot.
See the full rate card for every series →
Living with Carrara Plasma
Quartz is non-porous, so Carrara Plasma does not need sealing and resists the tea, coffee, oil and turmeric stains a Chennai kitchen sees daily. Wipe it with a soft cloth and mild dishwashing liquid. Use a trivet for hot vessels straight off the flame, and a board for chopping — the surface is scratch-resistant, not scratch-proof.
Common questions
What does Carrara Plasma quartz cost in Chennai?
Carrara Plasma is ₹650 per square foot for the stone, material only. One full regular slab is 322 × 147 cm — 51 sq ft — which works out to ₹33,150. Fabrication and installation is a separate ₹12,000 per slab and covers cutting, edge polishing, transport and fitting. Cutouts for a sink or hob are charged on top.
How many slabs of Carrara Plasma will my kitchen need?
A regular slab is 147 cm wide. A platform 2 ft deep takes 61 cm of that, so one slab yields two full-length runs of about 10.5 ft with a 25 cm strip to spare. A straightforward two-run kitchen usually fits in a single slab; adding an island or a tall backsplash generally pushes the job into a second slab even when the raw area looks like it would fit.
Can the veining in Carrara Plasma be matched across a joint?
Yes. Because Carrara Plasma is engineered rather than quarried, the pattern repeats predictably, so two pieces cut from the same or a matching slab can be aligned at a joint and the veining carried through. Tell us at measurement where the joints will fall and we cut to suit. This is the main advantage Carrara Plasma has over natural stone on a kitchen that needs more than one slab.
How do I look after Carrara Plasma?
Carrara Plasma is non-porous, so it never needs sealing and resists the tea, coffee, oil and turmeric a Chennai kitchen sees daily. Clean it with a soft cloth and mild dishwashing liquid, use a board for chopping, and use a trivet for vessels straight off the flame.
Can I see a full Carrara Plasma slab before ordering?
Yes. Carrara Plasma is on the racks at our Maduravoyal yard in full slab size, not in a sample book, so you can see the whole pattern in daylight before committing. We also deliver free samples anywhere in Chennai if you want to hold it against your cabinet and floor finishes first.
See the full slab before you decide
Photographs flatten veining. Carrara Plasma is on our racks in Maduravoyal — walk in and see the whole slab in daylight, or get a free sample delivered anywhere in Chennai.