Catalogue → Elegant series
Velvet Bronze quartz
A warm bronze-grey ground with a dense, fine sparkle. Reads near-plain from across the room and hides everyday marks better than a pale surface.
Specification
| Rate | ₹1030 per sq ft MSP, material only |
|---|---|
| Series | Elegant |
| Finish | Polished |
| Thickness | 2 cm |
| Slab size | Jumbo · 321 × 163 cm 56.32 sq ft per slab |
| Cost of one full slab | ₹58,010 material only |
| Brand | Paradigm |
| Stock | On the racks in Maduravoyal, Chennai |
What it costs to fit
The ₹1030 rate covers the stone only. A jumbo slab is 163 cm wide, and a platform 2 ft deep takes 61 cm of that, so one slab yields two full-length runs of about 10.5 ft with a 41 cm strip to spare. A two-run kitchen fits one slab; add an island and you are into a second.
Fabrication and installation is ₹12,000 per slab and covers cutting, edge polishing, transport and fitting. Sink and hob cutouts are charged separately. A pencil-nosed edge is included; bull nosing is ₹150 per running foot and a mitred joint, which makes the edge look like a thicker slab, is ₹300 per running foot.
See the full rate card for every series →
Living with Velvet Bronze
Quartz is non-porous, so Velvet Bronze does not need sealing and resists the tea, coffee, oil and turmeric stains a Chennai kitchen sees daily. Wipe it with a soft cloth and mild dishwashing liquid. Use a trivet for hot vessels straight off the flame, and a board for chopping — the surface is scratch-resistant, not scratch-proof.
Common questions
What does Velvet Bronze quartz cost in Chennai?
Velvet Bronze is ₹1030 per square foot for the stone, material only. One full jumbo slab is 321 × 163 cm — 56.32 sq ft — which works out to ₹58,010. Fabrication and installation is a separate ₹12,000 per slab and covers cutting, edge polishing, transport and fitting. Cutouts for a sink or hob are charged on top.
How many slabs of Velvet Bronze will my kitchen need?
A jumbo slab is 163 cm wide. A platform 2 ft deep takes 61 cm of that, so one slab yields two full-length runs of about 10.5 ft with a 41 cm strip to spare. A straightforward two-run kitchen usually fits in a single slab; adding an island or a tall backsplash generally pushes the job into a second slab even when the raw area looks like it would fit.
Can Velvet Bronze be joined without the seam showing?
Easily. Velvet Bronze has no dominant vein — the sparkle is distributed evenly across the slab — so a joint between two pieces disappears far more readily than on a heavily veined design. Tell us at measurement where the joints will fall and we cut to suit. On a kitchen that needs more than one slab this is the least demanding pattern to work with.
Is Velvet Bronze hard to keep clean?
It is one of the easier tones to live with. Being mid-toned, Velvet Bronze shows neither dust nor water marks as plainly as a pure white or a black. It is non-porous, so nothing soaks in and it never needs sealing — a soft cloth with mild dishwashing liquid is enough. Avoid abrasive powders and acidic descalers, and use a trivet for hot vessels.
Can I see a full Velvet Bronze slab before ordering?
Yes. Velvet Bronze is on the racks at our Maduravoyal yard in full slab size, not in a sample book, so you can see the whole pattern in daylight before committing. We also deliver free samples anywhere in Chennai if you want to hold it against your cabinet and floor finishes first.
See the full slab before you decide
Photographs flatten veining. Velvet Bronze is on our racks in Maduravoyal — walk in and see the whole slab in daylight, or get a free sample delivered anywhere in Chennai.